Master Spas 2014 H2x Owner's Manual download pdf (Page 23)

21DO NOT DIVE.

WATER QUALITY MAINTENANCE SCHEDULE -

ECO PUR™ (continued)

DO NOT DIVE.

as NeeDeD

If water looks hazy, check PH and Total Alkilinity, and treat with 1 ounce of chlorine

. Always refer

to the chemical manufactures dosage recommendations listed on the container.

These are general recommendations for water quality maintenance that may vary by usage and

or bather load. Depending on bather load and frequency of use, drain and refill times may vary as

well as the frequency of cleaning your filters.

A defoamer may be used when excessive foaming occurs. Over use of a defoamer will result

in cloudy, milky water.

use ONLY sPa CHeMICaLs

Do not use chemicals designed for use in swimming pools.

With a spa you are working with a small volume of hot water compared to a large volume of

relatively cool water in a swimming pool. Because of this chemicals will have a shorted life span

and bacteria can grow more quickly than in a swimming pool. A spa is less forgiving then a pool

and requires that whatever is put into it have a pH as close to neutral as possible. That is why only

chemicals made for spas should be used. Always refer to the chemical manufactures dosage rec-

ommendations listed on the container.

*sPeCIaL NOte:

We recommend a minimum level of 1.0 ppm residual chlorine be maintained in spa water. Always refer to the

chemical manufacturer’s dosage recommendations listed on the container.

When adding chlorine or non-chlorine shock/oxidizer always broadcast across the water while the pumps are

running.

The quantities of sanitizer and oxidizer shown in this manual are for 500 gallon spas and may have to be adjust-

ed depending on the actual amount of water that your spa holds. See the specifications section of this manual

for the correct gallons of your spa.

The concentration of active ingredients in spa chemicals varies by manufacturer. The amounts of sanitizer sug-

gested in this manual are based on spa chemicals that have the active ingredient percentages listed below:

Chlorine Non-Chlorine Shock/ Oxidizer

Active ingredient: Active ingredient:

Sodium dichlor ................................. 99% Potassium peroxymonosulfate ....................... 42.8%

Other ingredients ................................ 1% Inert ingredients ............................................ 57.2%

Total ............................................... 100% Total............................................................ 100%

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

No comments

Master Spas 2014 H2x Owner's Manual Page 23